【WANHUA】CLARNATE®A1225 WHD249
share
Clarnate® A1225
Features: Low viscosity, Easy release
Uses: General purpose
Appearance: white
Forms: Pellets
Processing Method: Injection molding
Features: Low viscosity, Easy release
Uses: General purpose
Appearance: white
Forms: Pellets
Processing Method: Injection molding
Detail
Properties
| Appearance | -- |
| Physical State | -- |
| Relative density (water = 1) | -- |
| Auto-Ignition Temperature | °C |
| Decomposition Temperature | -- |
| Solubility in Water | -- |
Specifications
| Melt Flow Index at 300°C/1.2 Kg | g/10min |
| Mold Shrinkage | % |
| Water Absorption at 23°C, 24h | % |
| Density | g/cm3 |
| Stress at Break at 50 mm/min | MPa |
| Tensile Modulus at 1 mm/min | MPa |
| Yield Stress at 50 mm/min | MPa |
| Yield Strain at 50 mm/min | % |
| Strain at Break at 50 mm/min | % |
| Flexural Strength at 2 mm/min | MPa |
| Flexural Modulus at 2 mm/min | MPa |
| Izod Notched Impact Strength at 23 °C | J/m |
| Heat Distortion Temp. at 1.82 MPa; 3.2 mm | °C |
| Vicat Softening Temp. at 120 °C/h; 50 N | °C |
| Haze at 3 mm | % |
| Light Transmittance at 3 mm | % |
| Refractive Index | -- |
| Flame Rating at 3 mm | -- |
| Flame Rating at 1.5mm | -- |
| Relative Permittivity at 100 Hz | -- |
| Relative Permittivity at 1 MHz | -- |
| Dissipation Factor at 100 Hz | 10^-4 |
| Dissipation Factor at 1 MHz | 10^-4 |
| Volume Resistivity | Ω·m |
| Surface resistivity | Ω |
| Electric Strength at 1 mm | kV/mm |
| Comparative Tracking Index at Solution A | V |
| Drying Temperature | °C |
| Drying Time | h |
| Injection Temperature | °C |
| Mold temperature | °C |
| Injection Speed | mm/s |
Hoskimi Technology (Shanghai) Co., Ltd
Email: tiger.kuang@hoskimi.com
Address: Room 2203, Building 6, Oasis Central Center, No. 1678 Jinshajiang Road, Putuo District, Shanghai
Column Navigation
Leave your demands, we will get in touch with you as soon as possible
Name*
*Email*
*Content*
*Verification code